Syringe Pumps

Overview

Syringe Pump for dosing, chemical mixing, microdialysis, injections

Reliable, accurate, and programmable!

Reliable due to a simple, robust design, and solid construction. This pump will run for many years of trouble free use. Accurate due to the use of a brushless stepper motor, a finely threaded precision lead screw and a microelectronic controller. Programmable using either the front control panel or by connecting the syringe pump to a computer.

Our syringe pumps are perfect for:

  • Animal Dosing
  • Microdialysis
  • Microfluidics
  • Electrospray
  • Chemical Mixing

Example flow rates per syringe

(valid for SP1000 and SP500 pumps)

Syringe Size (cc) Maximum Rate (mL/hr) Minimum Rate (µL/hr)
0.5 µL 25.49 0.001
1 53.09 0.73
3 192.5 2.646
5 406.1 5.581
10 600 8.244
20 975.8 13.41
30 1282 17.63
60 2120 29.13

Features

Features

  • Built for automation
  • Operates stand-alone (except SP500 series) or from a computer (except SP300 series)
  • Infusion (except SP300 series) and withdrawal by rate and/or volume
  • Programmable preset protocols
  • Program up to 41 pumping phases that change pumping rates, set dispensing volumes, insert pauses, control and respond to external signals, sound the buzzer
  • RS-232 and TTL logic control interfaces
  • Network, control, and monitor up to 100 pumps with one computer
  • Worldwide power supplies available
  • Motor stall detection, on most models
  • Dispensing accuracy of +/-1%
  • Unlimited lifetime technical support
  • One year warranty
dual syringe pumps for continuous pumping on a programmed schedule Not for clinical use on humans
The pumps are often used in dual-pump setups with check valves for continuous pumping so that one syringe dispenses while the other reloads. Please ask and we can provide the entire set up.

Models

Models

SP1000

SP2200

SP1600

SP1800

SP300

SP500

Max Syringe Size
60 ml
60 ml
60 ml
10 ml
60 ml
60 ml
Min Syringe Size
0.5 µl
0.5 µl
0.5 µl
0.5 µl
0.5 µl
0.5 µl
Flow Rate (Max per syringe)
2120 ml / hr
7635 ml / hr
1385 ml / hr
392 ml / hr
1516 ml / hr
2120 ml / hr
Flow Rate (Min per syringe)
0.001 µl/ hr
0.001 µl/ hr
0.001 µl/ hr
0.001 µl/ hr
0.001 µl/ hr
0.001 µl/ hr
Dimensions (length x width x height, inches)
8 ¾ x 5 ¾ x 4 ½ (22.9 x 14.6 x 11.4 cm)
8 ¾ x 5 ¾ x 4 ½ (22.9 x 14.6 x 11.4 cm)
10 ¼ x 15 x 5 (26.0 x 38.1 x 12.7 cm)
10 ¼ x 15 x 5 (26.0 x 38.1 x 12.7 cm)
8 ¾ x 5 ¾ x 4 ½ (22.9 x 14.6 x 11.4 cm)
9 ½ x 4 ¼ x 4 ¼ (23.5 x 10.8 x 10.5 cm)
Maximum Pumping Force (lbs)
35 @ min. speed, 15 @ max. speed
100 @ min. speed, 15 @ max speed
160 @ min. speed, 30 @ max speed
160 @ min. speed, 30 @ max speed
35 @ min. speed, 18 @ max speed
35 @ min. speed, 15 @ max. speed
Stand-Alone?
Yes
Yes
Yes
Yes
Yes
No
Programmable?
Yes
Yes
Yes
Yes
Yes
Yes

SP1000 programmable syringe pump $995

  • Holds 1 Syringe up to 60 cc
  • Infusion rates from 0.001 µL/hr (0.5 ml syringe) to 2100 ml/hr (60 cc syringe)
  • Easy-to-use keypad interface
  • Space Saving Chassis: Foot print size of only 5 3/4″ x 8 3/4″
  • Very easy to set up, just enter the syringe diameter, dispense rate, dispense volume, and press start
  • Advanced functions and programming features
  • Motor stall detection
  • Reliable and accurate. Designed and manufactured in the USA.
SP100 Programmable Syringe Pump

SP1010 high force pump $1,100

  • with twice the force of the SP1000 and 3X the maximum speed!

Multi-Syringe Pumps

SP2200 programmable dual syringe pump $1,295

programmable dual syringe pump SP2200

  • Similar to SP1000 but holds 1 or 2 syringes of up to 60 cc each. The syringes can be different sizes (this model only).
  • Infusion rates from 0.001 µL/hr (0.5 ml syringe) to 7630 ml/hr (60 cc syringe)

SP1600 programmable 6-syringe pump $1,995

programmable multi-syringe pump for mixing, animal dosing, injecting and draining

  • Similar to SP1000 but holds 2, 4,
    or 6 syringes (same size) of up to 60 cc each.
  • Infusion rates from 0.001 µL/hr (0.5 µL syringe) to 1337 ml/hr (60 cc syringe)
  • Higher flow rate models available

SP1800 programmable 8-syringe pump $1,995

programmable multi-syringe pump for mixing, animal dosing, infusion and withdrawal

  • Similar to SP1000 but holds 2, 4, 6, or 8 syringes (same size) of up to 10 cc.
  • Infusion rates from 0.001 µL/hr (0.5 µL syringe) to 380 ml/hr (10 cc syringe)
  • Higher flow rate models available

SP1070-M programmable syringe pump for microfluidics $1,995

programmable microfluidics syringe pump for mixing, animal dosing, infusion and withdrawal

  • The smoothest microfluidic syringe pump on the market (advance per step: 4.252232 Nanometers)
  • Infusion rates from 8 pl/hr (0.5 µL syringe) to 2545 µl/min (140 cc syringe)
  • double syringe model available

SP300 “Just Infusion” Syringe Pump $350

syringe pump SP300 infusion or injection only
Just the features that you want, and none that you don’t want to pay for. Similar to the SP1000 with just the basic features. Does not withdraw, volume target, or have computer interface.
  • Holds small or big syringes up to 60 mL
  • Pump continuously until you stop the pump
  • Infusion rate can be changed while pumping
  • Remembers previous settings on power up
  • Power failure mode allows pump to continue pumping after a reset
  • Syringe purge mode
  • Displays total volume dispensed in mL or µL units
  • Maximum pumping rate of 1500 mL/hr with a 60 mL syringe
  • Minimum pumping rate of 0.001 µL/hr with a 0.5 µL syringe
  • Precise reproducible flow rates
  • Selectable infusion rates units: mL/hr, µL/hr, mL/min, µL/min

SP500 open housing model $725

syringe pump SP500 for accurate dispensing
Designed for OEM applications, this pump has the same mechanisms and electronics as the SP1000 aside from the front panel controls
  • Built for Automation
  • Operates from a computer
  • Infusion and withdrawal
  • Set a single pumping rate and/or dispensing volume
  • Program up to 41 pumping phases that change pumping rates, set dispensing volumes, insert pauses, control and respond to external signals, sound the buzzer
  • Network, control, and monitor up to 100 pumps with one computer
  • Computer controllable: networkable up to 100 pumps
  • Stand-alone operation: pre-program the pump with a dispensing program, then operate the pump from an attached Foot Switch, button, or I/O controller
  • Add the OEM Starter Kit to run as a fully functional, stand-alone pump
  • Motor stall detection available in NE-501 model ($600)
  • Dispensing accuracy of ± 1%
  • Unlimited lifetime technical support
  • Two year warranty
 

SP510 open housing high force pump $790

  • with twice the force of the SP500 and 3X the maximum speed!


Accessories

Syringe Pump Accessories

We offer a line of accessories that add additional functionality to your syringe pumps. If you are ordering a pump in the 500 series, you should also order an Starter Pack to allow it to be interfaced with a computer.

×
×
This is a static CMS block edited from admin panel. You can insert any content here. ×
This is a static CMS block edited from admin panel. You can insert any content here. ×