RoboRocker Models

Our RoboRocker family of products comes in a variety of different models to suit your needs. Our reliable 210 series (210, 212, 214) can be trusted to keep your cultures rocking at a steady and consistent pace, and our high-speed 750 series (750, 752) can rock at up to 200 degrees per second! Each series also comes in different programming levels.

NEW – Steep Tilt (angles up to 45°) RoboRockers will start shipping the first week of August.

Looking for some help deciding what RoboRocker is best for you? Check out the tables below to learn more about the features of our different models and programing levels, and find out what fits your needs.

Comparison of RoboRockerâ„¢ Programming Levels for Program Features

RoboRocker 210/240/750 RoboRocker 212/242/752 RoboRocker 214/244
Program Features Level basic standard advanced
Programmable Tilt Angles 2 – same angle forward and reverse direction Up to 4 independent tilt angles Up to 4 independent tilt angles
Program Travel Speed – set the speed to travel from one tilt angle to the next same travel speed, forward and reverse independent speeds to each tilt angle independent speeds to each tilt angle
Programmable Pauses from 0 (no pause) to 90 minutes at each tilt angle same pause time forward and reverse independent pause time at each tilt angle independent pause time at each tilt angle
Stored Programs none up to 3 custom programs up to 6 custom programs
Ultra slow travel option-  to compensate for decreasing levels of culture medium in reservoirs over time not available as slow as hours per degree as slow as hours per degree
Pulsed Tilting to create pulsatile flow not available not available yes, can mimic flow from beating heart
Program Scheduling not available not available yes, can set up a schedule to advance from one program to the next

Comparison of RoboRocker Series

Regular RoboRocker 210 Series (210, 212, 214) Steep Tilt 240 Series (240, 242, 244) High Speed “Lightning Fast” 750 Series (750, 752)
Intended Use Microfliudid culture plates and other incubator applications. Steep angles enable greater shear stress in microfluidic culture plates Special applications which require the culture plate to travel very quickly to the intended angle.
Tilt Rangle ±30° ±45° ±30°
Travel Speed Minimum: 0.1 deg/sec Maximum: 30 deg/sec Minimum: 0.1 deg/sec Maximum: 30 deg/sec Min.: 0.1 deg/sec Max.: 200 deg/sec
Maximum Speed example -15° to +15° in 1 second -15° to +15° in 1 second -15° to +15° in 0.15 seconds, faster than the blink of an eye
Slow Travel Speed not available in the basic models Range: 1 minute per degree to ultra slow 300 minutes per degree (e.g. 3000 minutes or 50 hours to travel 10 degrees)
Pause Time Minimum: 0 seconds Maximum: 90 minutes
Load Capacity 11 lbs (5 kg) 2 lb (1 kg) 1 lb (0.5 kg)
Platforms and Racks Options (select when ordering the RoboRocker) Platform; Platform with stacking tray; 2-level rack; 4-level rack Platform; 1-level rack; 2-level rack 3-plate holder (1-level rack)
Height with platform 4.75 in. (12 cm) 6.9 in. (17 cm) not available with platform
Height with rack 2-level rack: 6.5 in. (16 cm); 4-level rack: 9.5 in.(24 cm) 1-level rack: 6.9 in. (17 cm); 2-level rack: 8.7 in. (21 cm) 1-level rack: 4.75 in. (12 cm)
  • Power: 24V DC, 60 Watt external power supply.
  • Temperature range: 4°C to 40°C (warning: rapid temperature changes may cause condensation and void the warranty).
  • Environment: The RoboRocker can be used safely in a CO2 incubator.
  • Mats: Models with platform: Textured neoprene rubber. Plate Rack models do not have rubber mats.
  • Weight: 8.5 lb (4 kg)
  • Height: See table above.
  • Width: Models with platform: 11.5 inches (29 cm) wide. Models with rack: 8 inches (20 cm) wide.  Allow clearance room on both sides for travel.
  • Depth: Models with platform: 11.5 inches (29 cm) deep.  Models with rack: 12.5 inches (32 cm) deep

RoboRockerâ„¢ Models

RoboRockerâ„¢ Culture Plate Racks

Placing culture plates in the plate rack is very easy. The 4 level plate rack with a capacity for 12 culture plates is shown.

RoboRocker model RR212-RK4 running a standard program.

Need a Quote? Have a Question?